Batching indicator


Batching indicator



Dual display-showing gross and net weight simultaneously
"Watchdog" circuit monitors and eliminates common malfunctions caused by excessive noise
Controls up to 4 different kinds of materials
All setpoint values are protected even power down
Coarse feed, fine feed and freefall compensation
Discharge control is provided
Out of tolerance checking
Batch report print out through RS232
RS232 input can be used to set setpoint data and system function data
Digital filter is provided for different sensitive environment
Start delay timer for special application
Discharge timer delay is programmable by operator
Zero return range is programmable
Tolerance range is programmable
Tolerance check delay timer is programmable
Comparison inhibit time is programmable to eliminate the batching error during production start and interchange of coarse/fine operation
Free fall compensation frequency is programmable
Full digital calibration and function setting method
Zero offset and span calibration can be carried out individually
Conversion rate up to 200 times/sec
BCD output rate is programmable
Standard RS232 serial input and output port
Drives up to 8 x 350£[ load cells

Mains Supply 110V / 220V AC ±10%, 50/60Hz
Power Consumption 18VA
Line Filter Built-in
Operating Temperature -5ºC to 50ºC (23ºF to 122ºF)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 280mA (8x350£[ load cell)
Input Sensitivity 0.5 µ V/D to 200 µ V/D
Zero Adjustment Range from 0.05mV to 15mV
Temperature Coefficient Less than (0.0008% of reading +0.3 digit) / ºC
Non-linearity 0.005% of F. S. D.
Conversion Rate 200 times / sec
Scale Range 500 to 100,000
Step Width 1, 2, 5, 10, 20, or 50
Maximum Display Resolution 15,000 divisions
Number of lngredients Four
Standard RS232 Port bi-directional , 2400, 4800, 9600 or 19,200 baud selectable, 7 data bit, even parity, 1 stop bit
Supplied Accessories Instruction manual, Load cell connector, Power cable, Fuse
Dimension 198mm (W) x 96mm (H) x 200mm (L)
Weight 2 kg approx.