Batching Weighing Indicator
 
Employing the latest SMT technology for the most reliable and best performance quality assurance. Bi-directional communication design allows indicator functions to be interacted externally by other devices or computer. CB900G is designed to provide comprehensive software for packing and batching control and can handle up to 4 materials

CB900G
Batching Weighing Indicator

Features
Specification

 


Bright and stable fluorescent tube is employed to display the gross weight and LED is employed to display the net weight
"Watchdog" circuit monitors and eliminates common malfunctions caused by excessive noise
Controls up to 4 different kinds of materials
All setpoint values are protected even power down
Coarse feed, fine feed and freefall compensation
Discharge control is provided
Out of tolerance checking
Batch report print out through RS232
RS232 input can be used to set setpoint data and system function data
Digital filter is provided for different sensitive environment
Start delay timer for special application
Discharge timer delay is programmable by operator
Zero return range is programmable
Tolerance range is programmable
Tolerance check delay timer is programmable
Comparison inhibit time is programmable to eliminate the batching error during production start and interchange of coarse/fine operation
Free fall compensation frequency is programmable
Full digital calibration and function setting method
Zero offset and span calibration can be carried out individually
Conversion rate up to 200 times/sec
BCD output rate is programmable
Standard RS232 serial input and output port
Drives up to 8 x 350£[ load cells
Load cell excitation supply is equipped with over current protection
CB900GA 3 stages batching control is factory presetted function


Main Supply 110V / 220V AC ±10%, 50/60Hz
Power Consumption 18VA
Line Filter Built-in
Operating Temperature -5ºC to 50ºC (23ºF to 122ºF)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 280mA (8x350 £[ load cell)
Input Sensitivity 0.5 µ V/D to 200 µ V/D
Zero Adjustment Range from 0.05mV to 15mV
Temperature Coefficient Less than (0.0008% of reading + 0.3 digit)/ºC
Non-linearity 0.005% of F. S. D.
Conversion Rate 200 times / sec
Scale Range 500 to 100,000
Step Width 1, 2, 5, 10, 20, or 50
Maximum Display Resolution 15,000 divisions
Number of lngredients Four
Standard RS232 Port Bi-directional, 2400, 4800, 9600, or 19,200 baud selectable, 7 data bit, even parity, 1 stop bit
Supplied Accessories Instruction manual, Load cell connector, Power cable, Fuse
Dimension 198mm (W) x 96mm (H) x 200mm (L)
Weight 2 kg approx.