Bagging Controller
 
Employing the latest SMT technology for the most reliable and best performance quality assurance. Bi-directional communication design allows indicator functions to be interacted externally by other devices or computer. CB900P is designed to provide comprehensive software for bagging control. Simple PLC function is provided for simplify the external control logic. Up to 9 sets of control procedure can be programmed for different application. Five sets of material target weight can be predefined. Number of batch cycle can be specified for continuous batching. Accumulative total and number of batch is provided. Re-batch is possible if the actual weight is less than target weight.

CB900P
Bagging Controller

Features
Specification

 

"Watchdog" circuit monitors and eliminates common malfunctions caused by excessive noise.
Simple PLC logic control can be programmed by user.
Batching and discharge time monitor.
Two stages digital filter.
Accumulative total and number of batch is provided.
Coarse, fine or dribble batch control and free fall compensation is provided.
Programmable fine control on delay timer.
Batch complete output and discharge complete out put timer.
Optional real time clock can be installed for report printing.
Separated comparison inhibit time for coarse and fine batching.
Free fall compensation enable range can be changed by operator.
Tare delay timer is programmable.
Number of tare value to be taken for the average tare value is programmable.
General batching features are included.
Comprehensive software based on years of bagging experience.
Number of setpoint value to be compared with the actual weight is programmable.


Main Supply 110V / 220V AC ±10%, 50/60Hz
Power Consumption 18VA
Line Filter Built-in
Operating Temperature -10ºC to 50ºC (14ºF to 122ºF)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 120mA (4x350 £[ load cell)
Input Sensitivity 0.5 µ V/D to 300 µ V/D (2 steps)
Zero Adjustment Range from 0.05mV to 15mV
Temperature Coefficient 10 ppm/ºC of F. S. D.
Non-linearity 0.005% of F. S. D.
Conversion Rate 120 times / sec
Scale Range 500 to 100,000
Step Width 1, 2, 5, 10, 20, or 50
Maximum Display Resolution 10,000 divisions
Display
6 digits 13mm Fluorescent tube (Green)
6digits 9mm LED display (Red)
BCD Output Rate 15, 50 or 100 times / second
Output Capacity Open collector output (max. 80V, 0.3A)
Optional Relay Output Board Voltage free contact (max. 220V, 1A)
Input / Output Control Point 6 nos / 12 nos
PLC Sequence 5 sets (programmable)
Standard RS232 Port or RS485 Port Bi-directional, 2400, 4800 , 9600 or 19200 bps selectable, 7 data bit, even parity, 1 stop bit
Supplied Accessories Instruction manual, Load cell connector, Power cable, Fuse
Dimension 198mm (W) x 96mm (H) x 200mm (L)
Weight 2 kg approx.