Batching indicator

Using up-to-date SMT technology, makes it possible to be more compact in size. Functions are the same as original batching indicator. Standard RS232 output provide batch report print out and data setting by remote device such as computer.

Batching indicator



Dual display-showing both gross and net weight simultaneously
The smallest batching controller, panel size is only 96mm x 48mm
Weight indicator integrated with setpoint controller
Provides complete material batching control function
Controls up to 4 different kinds of materials
Automatic zero tracking
Automatic taring by push button
Coarse feed, fine feed and freefall compensation
Digital calibration method
Batch report print out through RS232
Conversion rate up to 120 times/sec
RS232 input can be used to set setpoint data and system function data
Out of tolerance checking
Discharge control is provided
All setpoints are keyed-in through front panel switches and stored in internal memory

* Optional BCD or 0~5V or 4~20mA or 0~20mA analog output are available
* Optional serial printer TP150 is available

Mains Supply 110V / 220V AC ±10%, 50/60Hz
Power Consumption 9VA
Line Filter Built-in
Operating Temperature 0ºC to 50ºC (32ºF to 122ºF)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 150mA max.
Input Sensitivity 0.5mV/V to 2mV/V
Zero Point Adjustment Range from 0.05mV to 15mV
Temperature Coefficient Less than (0.005% of reading + 0.3 digits) /ºC
Non-Linearity Within 0.01% of full scale
Conversion Rate 120 times / sec
Scale Range 500 to 100,000
Step Width 1, 2, 5, 10, 20, or 50
Maximum Display Resolution 10,000 divisions
Number of Ingredients 4
Standard RS232 Port
2400, 4800, 9600, or 19,200 baud selectable, 7 data bit, even parity,
1 stop bit
Supplied Accessories Instruction manual
Dimension 96mm (W) x 48mm (H) x 144mm (L)
Weight 450g approx.