Batching Controller

 
Using up to-date delta-sigma A/D converter to achieve a higher speed and higher accuracy for the batching or packaging system. Built in RS232 or RS485 is selectable as standard feature (Factory preset). Multi-drop or long distance communication is possible by using RS485. Sophisticated software has been provided for different batching and packaging system application.

CB920X
The Smallest Batching Controller In the World

Features
Specification

 

Higher A/D conversion rate up to 200 times/seconds
Higher accuracy of weighing scale-display resolution up to 1/15000
Dual display-showing both gross and net weight simultaneously
The smallest batching controller, panel size is only 96mm x 48mm
Weight indicator integrated with setpoint controller
Provides complete material batching control function
Controls up to 4 different kinds of materials
All setpoints are keyed-in through front panel switches and stored in internal memory
All setpoints values are protected even power down
The batching result can be hold by function setting
Condition for start operation is programmable by function setting
Automatic tare condition is programmable by function setting
Automatic zero return during power up is possible
Tare check cycle is programmable by function setting
Compare check cycle is programmable by function setting
Compare inhibit timer is separated from coarse and fine interchange
Re batch is possible if the actual batched value is less than the set point
Dribble flow control is available for more accurate batching
Easy access plug type connector is used
Coarse feed, fine feed and free fall compensation
Digital calibration method
Software function setting method
Batch report print out through RS232 or RS485
RS232/RS485 input can be used to set setpoint data and system function data
Out of tolerance checking
Discharge control is provide



Mains Supply 110V or 220V AC selectable, 50/60Hz
Power Consumption 9VA
Line Filter Built -in
Operating Temperature -10˘XC to 50˘XC (14˘XF to 122˘XF)
Relative Humidity 90%, non-condensing
Load Cell Type All strain gauge type
Load Cell Supply 10V DC, 150mA max
Input Sensitivity 0.5mV/V to 2mV/V
Zero Point Adjustment Range from 0.05mV to 15mV
Temperature Coefficient Less than (0.0008% of reading + 0.3 digitals)/˘XC
Non-Linearity Within 0.0067% of full scale
Conversion Rate 200 times/seconds
Scale Range 500 to 100,000
Step Width 1,2,5,10,20 or 50
Maximum Display Resolution 15,000 divisions
Number of Ingredients 4
Built in RS232/RS485 Port 2400, 4800, 9600 or 19200 baud selectable, 7 data bit, Even parity, 1 stop bit
Supplied accessories Instruction manual
Output capacity Open collector max 80V 0.3A
Dimensions 96mm (W) x 48mm (H) x 162mm (L)
(Specifications subject to change without notice)

Option

* 0-5V, 4-20mA or 0-20mA analog output or BCD output (select only one)

* TP 150 serial printer